Linux Kernel boot-up messages on ARM11 MPCore based Platform

Today is the day I successfully port Linux kernel 2.6.27.4 to our own ARM11MPCore based SoC.

Linux version 2.6.27-arm1 (scott.shu@gmail.com) (gcc version 4.1.2)
#3 PREEMPT Tue Feb 10 05:
38:07 CST 2009
CPU: ARMv6-compatible processor [410fb020] revision 0 (ARMv7), cr=00c5387f
Machine: S----- ARM11 MPCore
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c021fc50, node_mem_map c0255000
DMA zone: 65024 pages, LIFO batch:15
CPU0: D VIPT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: root=/dev/ram0 rw init=/linuxrc mem=256M
console=ttyS0,38400
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x30
console [ttyS0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 254848KB available (1980K code, 273K data, 88K init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 73.11 BogoMIPS (lpj=365568)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 288 bytes
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 2379K
JFFS2 version 2.2. (NAND) i??Ac 2001-2006 Red Hat, Inc.
msgmni has been set to 502
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x78000000 (irq = 37) is a 16550A
brd: module loaded
loop: module loaded
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 3
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 88K
#
#